Description
This resin can be used in combination with epoxy and polycarbonate powder resins. Can mix various colors of high-temperature resistant powders from 350 ℃ to 600 ℃ Characteristics and performance: This resin is mainly used in ovens, ovens, silencers, and household appliances. This resin can self crosslink at high temperature and form a leveling effect when paired with epoxy polyester.
|
Code |
Appearance |
Cure condition (200°℃-230℃) |
Glass transition temperature |
Softening point (℃) |
Hydroxyl content% |
Feature & Applications |
|
PD-1 |
White or slightly yellow particle powder |
15-30min |
≥55℃ |
95±10 |
4.0±1 |
This series of resins can be combined with epoxy resin, polyester resin, and acrylic resin to prepare high-temperature resistant powder coatings at temperatures ranging from 200 ° C to 800 ° C. Mainly used in barbecue ovens, ovens, silencers, and household appliances, it can also be used for high-temperature mold products.
PD-2、PD-AB, Good gloss and leveling, PD-1 is better for fire burning, and PD-3 is more cost-effective for a barbecue stove.
|
|
PD-1A |
White or slightly yellow particle powder |
15-30min |
≥55°℃ |
100±10 |
4.0±1 |
|
|
PD-2 |
White or slightly yellow particle powder |
15-30min |
≥55°℃ |
95±10 |
4.0±1 |
|
|
PD-3 |
White or slightly yellow particle powder |
15-30min |
≥60℃ |
95±10 |
4.0±1 |
|
|
PD-3B |
White or slightly yellow particle powder |
15-30min |
260℃ |
100±10 |
4.0±1 |
|
|
PD-AB |
White or slightly yellow particle powder |
25-40min |
≥65℃ |
100±10 |
6.0±1 |
|
|
PD-CB |
White or slightly yellow particle powder |
15-40min |
265°C |
100±10 |
6.0±1 |
|
|
PD-MB |
White or slightly yellow particle powder |
15-30min |
275°℃ |
110±10 |
4.0±1 |
How to use :
1. This product can be mixed with various high-temperature resistant paints ranging from 200 ℃ to 600 ℃, and can be reasonably proportioned according to actual needs
2. This product has good leveling performance at 150 ℃ -180 ℃.
Precautions:
1. Be careful to prevent impurities from entering after opening.
2. Avoid contact with acid, alkali, organic and amine substances to avoid causing gel.
3. To prevent resin from clumping, the storage temperature should not exceed 40 ℃.
